S&A water chiller system for cooling wire edm machines

S&A water chiller system for cooling wire edm machines

A French dealer is looking for water chillers to be use on wire edm machines. After comparing with different chiller brand of China, they decide to choose S&A brand chiller CW-6200 as the cooling equipment of wire EDM machines.

S&A CW-6200 series is high-precision compression refrigeration water chiller,with intelligent temperature control,completed configuration,perfect protection and alarm system. S&A industrial water chillers are popular for its 2 temperature control modes as constant temperature and intelligent temperature control. Under intelligent mode, the water temperature is adjusted according to ambient temperature. With that 1 key solution, customers no longer need to worry about the water temperature adjustment of seasonal changes.

S&A chillers’ warranty is 2 years.

Features of CW-6200:

1. 5100W cooling capacity; optional environmental refrigerant;

 2. ±0.5℃ precisely temperature control; 

3. The intelligent temperature controller has 2 control modes, applicable to different applied occasions; with various setting and display functions;

4. Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm;

5. Multiple power specifications; CE, RoHS and REACH approval; 

6. Long working life and simple operation;

7. Optional heater and water filter.

CW-6200 parameter:

 Voltage:220V; Frequency: 50/60Hz; Refrigerant: R-22 / R-410a   

Pump power: 0.05KW/0.1KW/0.37~0.75KW; Tank capacity:15L

Max. lift:12M/25M/28~53M; Max. flow: 13L/min- 70L/min

N.W: 69Kgs; G.W: 79Kgs;

Dimension : 67 X 47 X 89 cm  (L X W X H); Packing dimension: 74 X 60 X 109 cm(L X W X H)

About S&A Brand

S&A(TEYU) was founded in 2002. After 15 years of development, the headquarter covers an area of 18,000 square meters, and has about 250 employees. With annual production capacity for cooling system up to 60,000 units, the product has been sold to more than 50 countries and regions. S&A has established a complete and strict quality management system to realize the strict control on the acquisition of components, the equipment production, the delivery and the after-sales service. As the saying goes, sharp tools make good work. Since condenser is the center of an industrial water chiller, S&A has invested millions of money in condenser production equipment and made strict control on a series of processes, including fins, bends and welding etc. to secure the quality of condenser. Also the introduction of welding robots has significantly improved and perfected the welding procedure. Therefore it can efficiently prevent the machinery breakdown caused by solder skips. This is also the main reason that why S&A water chiller has stable quality.

CONTACT S&A

SKYPE: teyuchiller ; Email: marketing@teyu.com.cn;

Website: http://www.teyuchiller.com

TE:+86-20-89301885;  FAX:+86-20-84309967